We all need shelter from the elements, especially in a country regularly lashed with ferocious storms, with piercing sunshine in between them. Our homes need a sturdy, well-built roof that will protect us from the rain and heat, and go the distance.
A key element to a protective roof is sarking, and in this article, we’ll explain its purpose, how it works, the benefits, types, and costs, and more.
Roof sarking is a thin pliable sheet with an aluminium foil lining that sits underneath the tiles of a roof. It’s hardy and waterproof, and creates an additional protective layer of insulation for the roof, by reflecting up to 97% of radiant heat from the sun. If rain gets the tiles and reaches the sarking, the water is safely channeled into the roof gutters to protect the roof from becoming damaged.
Aluminium is a material that naturally protects against the hot and cold, helping to regulate the temperature in the roof cavity.
The main purpose of sarking is to provide additional insulation for your home, but it has a number of other benefits, including:
Under the Building Code of Australia (BCA) it is mandatory that all modern tiled residential roofs with a rafter length greater than six metres are sarked, however, it is considered good building practice to sark all tiled roofs to protect homes from the entry of external moisture. This goes for both tiled, and metal roofs.
The main purpose of sarking is to protect the property from rain, but different types of sarking are available that provide other specific benefits such as hail protection, or extra thermal insulation. These are also usually split between the property’s roof type—tiled, or metal.1
COLORBOND steel is designed to be thermally efficient, but because roof sarking has a high reflective quality, it will improve the thermal performance of the roof even more, helping to keep your house cooler in summer.
If you find a tear in your sarking, the insulation that it provides will be less efficient. Thankfully, tears are easily fixed with special tape, such as Enviroseal’s ProctorWrap tape.
The cost of reflective roof sarking varies, depending on its thermal efficiency. Cheaper sarking costs around $100 for a 60m x 1350ml roll, with expensive “air cell” barrier sarking that offers a BCA 6-star energy efficiency costing around $350 for a 22.5m x 1350ml roll.2
Essentially, the sarking is rolled out in sections away from the eaves of the roof, with a slight overlap between each layer. But the process is much more complex than this. You’ll need to consider a range of issues such as thermal bridging, vapour barriers, ventilation, and air gaps. Because proper insulation is critical for a home, it’s highly recommended to hire roofing experts for the job, as they’ll have the experience needed to complete the job effectively.
If you’re set on installing the insulation yourself, check out this comprehensive article from the government.
The easiest time for installation is when a house is being built, or when a roof is being replaced. By installing the sarking early in the build process, the house will be protected from the weather until the roof is completed.
Roof sarking is not only necessary for improving the thermal efficiency of your home, it’s mandatory under the Building Code of Australia, in an effort to tackle wasted energy and the effect that it has on climate change. Our homes must protect us from the elements and be properly insulated to regulate the temperature, and sarking helps us to achieve these goals.
References
While Australia is known the world over for blue skies and beautiful beaches, most locals…
If your roof’s showing its age — cracked tiles, fading paint, or brown ceiling stains…
Gutters play a critical role in protecting your home from water damage, but over time,…
If you’ve ever wondered: How dangerous is asbestos roofing?, then this article is for you!…
When was the last time you inspected your roof? If you’re like most Australians, the…
At some point in your home-owning journey, you'll likely need to hop on a ladder…